Rotary Vacuum Dryers offers clean, and effective method of drying filtered/centrifuged wet cakes, wet powders and slurries. Operating under Vacuum, the dryer effectively dries heat sensitive material to very low moisture levels. It is available in sizes from 100 liters upto 12,000 liters gross volume
The central agitator shaft is supported on the two end bearings housed in bearing housing in such way that the alignment remains always intact. This central agitator is driven by means of a motor & Gear box through the bull Gear.

Cooling could also be provided by cold water/brine/refrigerant through the jacket. The horizontal shell is jacketed to heat the shell with steam/hot  water or thermal fluid. Limpet coil is provided instead of jacket if the heating media is fluid.
A Dust Catcher consisting of bag filter is provided on the top to prevent the losses of material particles after the drying process.
A Condenser of adequate surface area is provided wherein the evaporated vapours are condensed vapours are then collected in the receiver of suitable capacity, placed beneath the condenser.
A Vacuum Pump of adequate capacity is provided & fitted to the receiver to create the vacuum in the drier shell through the Receiver, Condenser and Dust Catcher.